OLD L-Set Ore Grading Processor II Blueprint
Unpublished Structure Module and Rig BlueprintsSearch blueprints...
Production Tree
About OLD L-Set Ore Grading Processor II
The Standup L-Set Ore Grading Processor II rig provides a means for structure operators to adjust hardware systems involved in reprocessing asteroid ore so as to significantly increase refinery efficiency on Upwell technology structures.
Standup is a proprietary system that uses a Structure Autonomous Nanoassembly Device (Upwell) containing integrated template software, a nanoassembler array and sufficient nanomass to enable the construction of a variety of service modules, structure modules and structure rigs when inserted into the appropriate slots on a structure built with Upwell technology.
Note: Only one rig of the same type, counting both tech variations, may be fitted at the same time on a structure.
Characteristics
TypeOLD Structure Resource Rig L - Ore Reprocessing
Volume20 m³
Mass0.2 t
Raw Materials Required
Base materials needed to build 1× OLD L-Set Ore Grading Processor II from scratch. Fractional quantities appear when intermediate components are produced in batches (reactions, fuel blocks, etc).
Lorentz Fluid4,500
10.36B ISK
Trigger Unit11,400
5.86B ISK
Telemetry Processor11,400
2.07B ISK
Power Conduit4,500
1.67B ISK
Current Pump11,400
1.59B ISK
Drone Transceiver11,400
430.01M ISK
Nanite Compound240
420.00M ISK
Micro Circuit11,400
53.09M ISK
Intact Armor Plates30
51.12M ISK
Single-crystal Superalloy I-beam240
18.32M ISK
Nocxium0.36
231.984 ISK
Isogen0.82
156.374 ISK
Mexallon2.22
117.194 ISK
Pyerite4.44
72.372 ISK
Tritanium5.56
21.406 ISK
Total Raw Materials Cost (Jita Sell)22.53B ISK
EVE Online is a trademark of CCP hf. All rights reserved.